Discover how to work with various parametric components and the bridge annotations available to view.
- [Lynda] Infraworks can be a little tricky…when it comes to selection, especially with bridges…because there are so many components.…So it's work just repeating…how to select components.…We are in bridge design for Infraworks 2019.2 model one.…We are in proposal bridge design three underscore one.…And we're working at bridge view six, on the bookmarks.…Now, make sure nothing is selected…and then click on the road.…Notice what it says in the stack,…it is a road and you have road attributes.…
Now click on the side of the bridge…and we'll see that we now have the bridge selected.…It's not the road that's on top of the bridge,…it's the actual bridge structure itself.…It says bridge over here,…and the attributes and parameters are quite different.…Now, if we have a look here,…this annotation line at the top over here,…is the length of the bridge.…The distance between abutments.…
So, if we zoom out a little bit we'll see,…there's the start station, there's the end station.…So the bridge is just over 334 meters long.…
Author
Released
12/13/2018- Preparing a road for parametric bridge design
- Modifying a bridge in InfraWorks
- Drawing a bridge on a component road
- Adding bridge decorations
- Changing road assemblies on bridges
- Performing line girder analysis on a bridge
- Working with parametric components in InfraWorks and Inventor
Skill Level Intermediate
Duration
Views
Related Courses
-
Roadway Design: InfraWorks 360
with Eric Chappell1h 42m Intermediate -
InfraWorks: Enhancing and Optimizing Roads (2017)
with Lynda Sharkey2h 26m Intermediate -
InfraWorks: Drainage Design
with Lynda Sharkey1h 47m Intermediate -
Infraworks: Visualization Techniques
with Lynda Sharkey1h 13m Intermediate
-
Introduction
-
Using the example files1m 26s
-
1. Get Familiar with Bridges in InfraWorks
-
Model Builder and Road Recap4m 53s
-
-
2. Modify a Bridge in InfraWorks
-
Parametric bridge attributes3m 42s
-
Work with bridge components2m 43s
-
Work with abutments4m 30s
-
Work with girders3m 27s
-
Work with bridge decks6m 42s
-
-
3. Change Road Assembilies on Bridges
-
Add bridge decorations8m 12s
-
Create an assembly for reuse2m 25s
-
-
4. Bridge Analysis
-
Bridge quantities2m 58s
-
Line girder analysis5m 57s
-
5. Parametric Wizardry
-
Use the edited component2m 29s
-
Conclusion
-
Next steps35s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Work with bridge components