Create a copy of a component to use as a starting point for editing in this video.
- [Instructor] From Bridge Design for InfraWorks 2019.2…Model 6, Bridge Design nine…We're still at bridge view 22.…And what we're going to do now…is we're going to change some piers.…Now if you recall,…when we were looking at this bridge on Wikipedia,…there's a suspended walkway under the southbound span.…Now, what we might want to do…is change the shape of the pier.…
So we can see here that if we click on the pier,…there are many attributes that we can change.…We can change the…diameter, we can change the number of columns,…we can change the pier height,…all these types of things.…But we can't actually change the shape of the pier cap.…So what we're going to do,…is we're going to create a new pier…with a cutout so that the suspended walkway…has a little more head room.…And the way that we can do that is…by going to the intelligent tools…and bringing up the style pallette.…
On the style pallette on the tabs on the left,…there is a parametric models tab.…Click on that and then double click bridge,…piers.…Now here are the default piers that ship with InfraWorks.…
Author
Released
12/13/2018- Preparing a road for parametric bridge design
- Modifying a bridge in InfraWorks
- Drawing a bridge on a component road
- Adding bridge decorations
- Changing road assemblies on bridges
- Performing line girder analysis on a bridge
- Working with parametric components in InfraWorks and Inventor
Skill Level Intermediate
Duration
Views
Related Courses
-
Roadway Design: InfraWorks 360
with Eric Chappell1h 42m Intermediate -
InfraWorks: Enhancing and Optimizing Roads (2017)
with Lynda Sharkey2h 26m Intermediate -
InfraWorks: Drainage Design
with Lynda Sharkey1h 47m Intermediate -
Infraworks: Visualization Techniques
with Lynda Sharkey1h 13m Intermediate
-
Introduction
-
Using the example files1m 26s
-
1. Get Familiar with Bridges in InfraWorks
-
Model Builder and Road Recap4m 53s
-
-
2. Modify a Bridge in InfraWorks
-
Parametric bridge attributes3m 42s
-
Work with bridge components2m 43s
-
Work with abutments4m 30s
-
Work with girders3m 27s
-
Work with bridge decks6m 42s
-
-
3. Change Road Assembilies on Bridges
-
Add bridge decorations8m 12s
-
Create an assembly for reuse2m 25s
-
-
4. Bridge Analysis
-
Bridge quantities2m 58s
-
Line girder analysis5m 57s
-
5. Parametric Wizardry
-
Use the edited component2m 29s
-
Conclusion
-
Next steps35s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Copy a parametric component in InfraWorks