From the course: Cisco CCNA (200-301) Cert Prep: 2 IP Connectivity and Services
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Interpret the routing table
From the course: Cisco CCNA (200-301) Cert Prep: 2 IP Connectivity and Services
Interpret the routing table
- [Instructor] The routing table is the heart of every router, and it's filled via a few different methods. One is connected routes. As an IP address is added to a router's interface via the IP address command and then the interface is in the up/up state, an entry is placed into the routing table for this subnet. When I've referred to a directly connected subnet, this is precisely what I'm referring to. Another is static routes. A static route is one that is manually configured by an administrator using the IP route command. Last is via routing protocols. When routing protocols are configured on multiple connected routers, they will dynamically inform each other of routes from their routing tables, as well as those taught to them from other routers participating in the protocol. The local routing table is viewed via the show ip route command. The command outputs stats by giving all of the codes that will be associated with routing entries. These codes will show up to the left of each…
Contents
-
-
-
Forwarding on routers3m 22s
-
(Locked)
Interpret the routing table2m 50s
-
(Locked)
Route selection3m 5s
-
(Locked)
Configure static IPv4 routes6m 23s
-
(Locked)
Configure static IPv6 routes3m 10s
-
(Locked)
IPv6 neighbor discovery3m 10s
-
(Locked)
Routed interfaces5m 28s
-
(Locked)
Routing protocol basics3m 52s
-
(Locked)
OSPF basics and neighbors3m 38s
-
(Locked)
OSPF interface types and areas3m 19s
-
(Locked)
OSPF configuration5m 17s
-
(Locked)
OSPF additional features5m 59s
-
(Locked)
First hop redundancy protocols3m 37s
-
-
-