From the course: Network Virtualization: SDN Overlay Solutions
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
Demo: Automatic OpenFlow rules
From the course: Network Virtualization: SDN Overlay Solutions
Demo: Automatic OpenFlow rules
- [Instructor] So now let's look at the VRS's. First VRS 99 99 99 108 has two virtual machines registered. I have SSH'd to the VRS. Notice the IP address of the VRS. The VRS is running OpenFlow so I can use the command sudo ovs-vsctl show exactly as you would with mini net as an example. You can see the bridge that it's using is the Nuage network's bridge rather than the standard bridge that you get, for instance, with Open vSwitch. The controller that it's communicating with is controller one with this IP address. That is the VSC that it's communicating with which in this case is VSC 1. Now this kind of information can be seen directly through the graphical use interface. But I wanted to show you that OpenFlow is being used on the VRS's and OpenFlow rules have been written to the switch. You can see as an example that it's connected to the controller and you can see the ports available on the VRS. If I wanna see the VMs that have registered I can do this command. So sudo ovs-appctl…
Contents
-
-
-
-
-
(Locked)
Nuage Networks topology and component5m 58s
-
(Locked)
Demo: VSP visibility – power on/off6m 40s
-
(Locked)
Demo: Automatic ACLs and policies, part 15m 33s
-
(Locked)
Demo: Automatic ACLs and policies, part 23m 59s
-
(Locked)
Demo: Nuage GUI and CLI4m 39s
-
(Locked)
Demo: Automatic OpenFlow rules10m 7s
-
(Locked)
Demo: Multiple ESXi hypervisors4m 17s
-
(Locked)
Demo: VM locations1m 31s
-
(Locked)
Demo: What happens if an underlay breaks?3m 10s
-
(Locked)
Demo: Layer 2 domain spanning DC7m 6s
-
(Locked)
Demo: Dynamic tunnels4m
-
(Locked)
-
-