Join Vladimir Mariano for an in-depth discussion in this video Upload the exercise files, part of Fusion 360: 3D Printed Product Enclosure.
- [Instructor] If you completed the prequel to this course,…Intro to Product Design,…then you should have a projects folder…in your data panel labeled, enclosure parts.…If not, then I will show you…how to upload those files into Fusion 360.…If you have access to the exercise files in this course,…you'll want to go ahead and download those now.…I have them saved to my desktop in a folder…just called exercise files,…and if I double-click on it,…you'll see that we have our four parts,…our battery charger, our battery,…our circuit playground board, and our slide switch.…
Now because Fusion 360 is party cloud-based,…that means our designs are actually saved on the cloud.…So there's a few steps we'll have to take here…to get our projects uploaded.…In our data panel, we'll want to click…on the new project button.…If you don't see it, you may be inside a project already,…and you may have to click the back arrow.…We'll click on the new project,…and we'll call this one, enclosure parts,…and hit enter.…We can now double-click inside that project,…
Author
Released
12/18/2017- Changing Fusion 360 settings
- Inserting parts into a current design
- Modifying a linked component
- Moving, aligning, and positioning components
- Designing a housing
- Modeling circuit playground platforms
- Checking the fit for 3D printing
- Preparing for 3D printing
- Modifying constraints
- Designing a cover and a shell
- Adding cutouts
- Finishing the assembly
Skill Level Intermediate
Duration
Views
Related Courses
-
Fusion 360 Product Design: Lighting
with Carl Frischmuth5h 54m Intermediate -
Learning Autodesk Fusion 360
with Taylor Hokanson1h 41m Appropriate for all -
Learning 3D Printing
with Kacie Hultgren1h 16m Appropriate for all -
Additive Manufacturing: Optimizing 3D Prints
with Rich Cameron1h 24m Intermediate -
Design for Additive Manufacturing: FDM
with Kacie Hultgren1h 47m Intermediate
-
Introduction
-
1. Set Up
-
Change settings1m 51s
-
Upload the exercise files1m 33s
-
2. Insert and Position Components
-
Modifying a linked component5m 15s
-
Review of the layout3m 11s
-
Model standoffs, continued4m 48s
-
3. Model Enclosure Base
-
Housing for the slide switch7m 48s
-
Modify and mirror platforms5m 41s
-
Secure the battery3m 9s
-
Modify standoffs3m 45s
-
-
4. Model Enclosure Cover
-
Design the cover and shell5m 51s
-
Cutouts for LEDs and ports5m 24s
-
Cutout for the slide switch4m 36s
-
Assembly1m 46s
-
-
Conclusion
-
Next steps1m 15s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Upload the exercise files