From the course: Fusion 360: Revolve and Sweep
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Sweep the large tube - Fusion 360 Tutorial
From the course: Fusion 360: Revolve and Sweep
Sweep the large tube
- [Instructor] Let's begin splitting our main body. Let's head up to modify selecting split body. The body to split is our main body. Activating our splitting tool, and to make sure let's enable extend splitting tool. Let's select this line, and hit okay. We now have our two main bodies. Let's repeat the command. I can right click and select repeat split body. Let's select our main body once more. Activating our splitting tool selecting this line. Hitting okay. Let's split this body. Right click and selecting repeat split body, selecting this body, activating our splitting tool, and in this instance let's select this line. Hitting okay. Finally, let's repeat split body once more. The body to split is this body, this body, and this body. Activating splitting tool. And let's select this line. Hitting okay. Next, let's apply a draft to this body. Let's head up to modify and selecting draft. For our plane let's select this face, and for the faces let's select this face and this face…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Design parameters5m 26s
-
(Locked)
Sketch the tube guides5m 55s
-
(Locked)
Sweep the large tube5m 46s
-
(Locked)
Sweep the cart handle3m 58s
-
(Locked)
Sweep the lower section5m 36s
-
(Locked)
Sweep the front tube6m 52s
-
(Locked)
Sweep the upper tubes6m 10s
-
(Locked)
Sweep the bumper3m 12s
-
(Locked)
Complete the tubes5m 21s
-
(Locked)
-
-