From the course: Fusion 360: Revolve and Sweep
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Sweep the bumper - Fusion 360 Tutorial
From the course: Fusion 360: Revolve and Sweep
Sweep the bumper
- [Instructor] Welcome back. In addition, let's recreate the front bumper here. But first, let's head to construct, and grab our plane at angle. Selecting this edge, move and rotate our handle, key in 80, hitting enter. Let's sketch our path, selecting this plane, hitting L for line. Let's hit P for project to project this end point and this end point. Hit OK, hit L to regrab our line, left click here, left click and hold, release, left click, hit escape. Let's apply a tangent constraint to this arc and this line, hitting escape. Hit D for dimensions, selecting the center point, and this edge, left click here, key in 20, hitting Escape. And finally, let's select this line, right click and make this perfectly vertical. Hit L once more, create a line from here going to this end point. Hitting escape, repeating line, left click here, and left click here. Hitting escape, let's turn off the visibility of our bodies. Hit S for sketch shortcuts, typing F-I-L, selecting fillet. Selecting this…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Design parameters5m 26s
-
(Locked)
Sketch the tube guides5m 55s
-
(Locked)
Sweep the large tube5m 46s
-
(Locked)
Sweep the cart handle3m 58s
-
(Locked)
Sweep the lower section5m 36s
-
(Locked)
Sweep the front tube6m 52s
-
(Locked)
Sweep the upper tubes6m 10s
-
(Locked)
Sweep the bumper3m 12s
-
(Locked)
Complete the tubes5m 21s
-
(Locked)
-
-