From the course: Fusion 360 Modeling Techniques and Workflow
Join today to access over 22,700 courses taught by industry experts or purchase this course individually.
Offset plane - Fusion 360 Tutorial
From the course: Fusion 360 Modeling Techniques and Workflow
Offset plane
- [Instructor] Now that we have the exterior shape of the top tube built and we have the two internal thicknesses, our thinnest and thicker section of the tubes made, it's time to construct the final set-up for the inside surface. So, what we're going to do is, let's go ahead and remove this exterior surface, and we have these two surfaces remaining. So we have one, which is the thinnest section, which is this one here, this one, and then we have this thicker section. So what we need to do here is, we're going to use this construction plane back here as a reference, and we're going to offset construction planes from here to a said distance, and then we're going to use those later to cut these surfaces up, and then we can have the thickest section, which is going to be on this end here, and on this end over here, and then the thinnest section will be in the center, we'll have also cut, and then there'll be a gap between…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.