From the course: Fusion 360: 3D Printed Product Enclosure
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Move and align the charger into position - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Move and align the charger into position
- [Narrator] In order to have a good reference surface to lay out our parts about, we'll create a simple base so that we can know where the arrange our parts. To do so we're simply going to create a circle and extrude it. We'll begin by going to create sketch and we're going to select our X-Y plane. Now if you're in a situation like this where you have a part and other surfaces and planes in the way, if you left click and hold, you get this option here where it will let you choose what surface you want to sketch on. In this case I can choose between the top face, my X-Y plane, or that bottom face. The other option is to just simply go in your browser and remove the object that's in the way. I'll untoggle the battery. Now I have no problem selecting the X-Y plane. We'll select that and we're into our sketch mode. Let's remove any part that we don't need right now. I don't need the circuit playground and we'll take out the slide switch. We'll begin by hitting C for center diameter…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Insert parts into current design3m 30s
-
(Locked)
Modifying a linked component5m 15s
-
(Locked)
Review of the layout3m 11s
-
(Locked)
Move and align the charger into position4m 30s
-
(Locked)
Model standoffs for the charger7m 58s
-
(Locked)
Model standoffs, continued4m 48s
-
(Locked)
Align and position components6m 22s
-
-
-
-