From the course: Fusion 360: 3D Printed Product Enclosure

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Modify battery constraints

Modify battery constraints - Fusion 360 Tutorial

From the course: Fusion 360: 3D Printed Product Enclosure

Start my 1-month free trial

Modify battery constraints

“

- [Instructor] Next we'll modify the positioning of our battery. So to get a good look at it, let's remove that circuit playground board and we'll go to a top view. The issue we're having here is the battery is just too close to the battery charger, so that when we plug in our battery connector, it will actually interfere with this battery. To get a better look at that, let's take a look at the side view. Notice the height of the battery compared to our port for the connector. So we can clearly see that how that would be an issue. Okay, to solve this, we're going to just move the battery a little bit to the left, and to do that, we're going to need to modify this extruded block here. So let's jump into that sketch by right-clicking on the side of this block and going to Edit Profile Sketch. That's going to bring us to that sketch and we're going to remove all the components we don't need here. And let's expand sketches and we'll just toggle all the sketches that are useful to us. So…

Contents