Join Vladimir Mariano for an in-depth discussion in this video Modify battery constraints, continued, part of Fusion 360: 3D Printed Product Enclosure.
- [Instructor] The last thing we need to address…as mentioned in the previous video,…is the distance between these two columns here.…So take a look at the problem.…We know that our battery,…the dimensions we can check here is 36 millimeters.…And we can verify by measuring between these two sides.…And we have 36 millimeters there.…Now if we take our measurement…from the edge of this block to this one,…we're looking at 35.335.…
So as we can visually see, it would cut our battery…and not allow it to fit.…So we need to go ahead and amend this…to give it some more distance in the middle there…so our battery can fit nicely in there.…We'll do that by again going into that sketch.…So we're going to right click on the side of the face here…and go Edit Profile Sketch.…Now you have to be careful here.…I'm going to undo it and show you something.…It worked because, remember this was the original one…we made and then we mirrored to this side.…
If I were to click on this one…and go to Edit Profile Sketch, it gives me only two options,…
- Changing Fusion 360 settings
- Inserting parts into a current design
- Modifying a linked component
- Moving, aligning, and positioning components
- Designing a housing
- Modeling circuit playground platforms
- Checking the fit for 3D printing
- Preparing for 3D printing
- Modifying constraints
- Designing a cover and a shell
- Adding cutouts
- Finishing the assembly
Skill Level Intermediate
Fusion 360 Product Design: Lightingwith Carl Frischmuth5h 54m Intermediate
Additive Manufacturing: Optimizing 3D Printswith Rich Cameron1h 22m Intermediate
Design for Additive Manufacturing: FDMwith Kacie Hultgren1h 47m Intermediate
1. Set Up
2. Insert and Position Components
3. Model Enclosure Base
4. Model Enclosure Cover
Next steps1m 15s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.