Join Vladimir Mariano for an in-depth discussion in this video Cutouts for LEDs and ports, part of Fusion 360: 3D Printed Product Enclosure.
[Narrator] Now that we've modeled…the top portion of our enclosure and shelled it…we'll need to make some cutouts here…so that certain elements from our circuit playground board…can be able to poke through.…So let's bring in all our components…so we can see everything and we'll get rid of top…and just show the bottom for now.…The first thing I want to do actually is,…I need to rotate this circuit playground…because I want this battery plug to be on this side…and the USB plug to be on the opposite side.…
So I'm going to right click on our circuit playground here…above our or right below our browser.…Go to move and let's go to a top view.…I'm going to rotate this and just enter 180 degrees there.…And click okay and that'll go ahead and rotate it.…Now I want to create a sketch on the top portion…of the enclosure, so I'll go to create sketch,…select that top portion, we'll click capture position,…and we'll remove the top now so you can actually see…the components under it and we'll hit C for circle.…
And I'm going to start at the origin…
- Changing Fusion 360 settings
- Inserting parts into a current design
- Modifying a linked component
- Moving, aligning, and positioning components
- Designing a housing
- Modeling circuit playground platforms
- Checking the fit for 3D printing
- Preparing for 3D printing
- Modifying constraints
- Designing a cover and a shell
- Adding cutouts
- Finishing the assembly
Skill Level Intermediate
Fusion 360 Product Design: Lightingwith Carl Frischmuth5h 54m Intermediate
Additive Manufacturing: Optimizing 3D Printswith Rich Cameron1h 22m Intermediate
Design for Additive Manufacturing: FDMwith Kacie Hultgren1h 47m Intermediate
1. Set Up
2. Insert and Position Components
3. Model Enclosure Base
4. Model Enclosure Cover
Next steps1m 15s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.