From the course: Fusion 360: Surfacing with the Patch Workspace
Unlock the full course today
Join today to access over 22,700 courses taught by industry experts or purchase this course individually.
Creating a loft based on profiles - Fusion 360 Tutorial
From the course: Fusion 360: Surfacing with the Patch Workspace
Creating a loft based on profiles
- [Instructor] With our profiles in place, let's now grab our Loft tool but first make sure that our workspace is in Batch, head to Create and select Loft. For our first profile, zooming in, selecting our bottom ellipse, second ellipse, third ellipse and finally, the circle. Make sure that our end condition for Profile 1 and 4 is free. Change selection and closed, uncheck, operation, new body and hit OK. Moving forward, let's grab our ellipse tool once more and create the sketch for this feature. Let's grab our ellipse for the plane and select our XY plane. Let's drop the center point of our ellipse here at this intersection, move up, key in 30 and left click once more slowly moving to the right, keying in 20, hitting enter. I'm going to move this dimension up, this one to the right, grab our ellipse once more, place the center point at the center section. I'm going to key in 65, hitting enter, left click and let's key in 55, hitting enter, enter once more. Repositioning our…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.