From the course: Fusion 360 Modeling Techniques and Workflow
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Construction plane and sketch - Fusion 360 Tutorial
From the course: Fusion 360 Modeling Techniques and Workflow
Construction plane and sketch
- [Instructor] In this video, we are going to start working on the internal geometries of the seat tube. Now in previous videos, we created the internal surface by using lofts and sweeps of geometry that we had specified, and then created that geometry. In this particular case, we're going to do something similar, but different. We've already created a seat tube with the thickest section of the tube, created all the way through the tube. What we need to do is create a thinner section for the taper and then the rest of the tube. So we want to cut the tube. So what we're going to go ahead and do, is create a surface that represents a cutting tool that would be used to remove the inside of this tool. Think of it almost as like a coring tool. We're going to come in and basically cut the thinner section and then the taper and remove that from the tube that we've already created. So let's get started. Let's come up to the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.