Join Jomarc Baquiran for an in-depth discussion in this video Completing the assembly, part of Migrating from AutoCAD to Fusion 360.
- [Male Voice] We have components…already positioned properly in our assembly,…like our wheel and axle, but has no joints.…If this is the case, then one of the best tool…for this scenario is to apply an As-built Joint…Let's head up to assemble.…Selecting As-built Joint.…Our target here is to select our axle…and either of these walls can be selected.…
Let's select this wall.…Next, our intent is to have a revolute type motion.…I'm going to hover over this face, hold control.…Notice there's our joint origin.…Left-click, and finally, hit OK.…Inspecting...…Let's move this, hit undo,…grab our As-built Joint, hit shift J.…
Let's change the motion type to rigid.…Selecting this wall and selecting our Supporting Pin,…hitting OK, let's inspect.…And because our Supporting Pin is grounded,…we can not move this wall any longer.…So let's grab our As-built Joint once more,…but first let's inspect.…Control Z, repeat As-built Joint,…selecting this component, selecting our Support Pin, hit OK.…
Repeat the command.…Let's select this wall and our Supporting Arm,…
- Similarities and differences between AutoCAD and Fusion 360
- Collaborating in Fusion Team and A360
- Sketch constraints
- Creating and modifying tools
- Design intent
- Assembling parts and components
- Creating 2D drawings
- Importing AutoCAD files
- Exporting a drawing to DWG
Skill Level Intermediate
Migrating from AutoCAD to Inventorwith Thom Tremblay1h 18m Beginner
Migrating from AutoCAD to Revitwith Paul F. Aubin2h 18m Intermediate
Cert Prep: Autodesk Fusion 360 Userwith Thom Tremblay55m 32s Intermediate
1. Getting Started
2. Constraints and 3D Part Modeling
3. Assemble Parts and Components in Fusion 360
4. Creating 2D Drawings in Fusion 360
5. Working with AutoCAD Files
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.