…Now, you need to open up the side of the camera.…It's the same side with the SSD.…You just flip that open and there's a USB port on the side.…Take a standard USB cable, the A to B, the…mini type, and just connect that to the USB port.…Once it's plugged in on the camera side, plug it into your computer.…Now, you can launch the software.…Now I recommend the camera's turned on so it…sees it, and launch the Black Magic camera utility.…There we go, it did properly see it.…
Now in this case, its telling me I need to update my software.…Not unexpected here.…This particular camera does have a software update.…From time to time, you will want to update the camera.…I'll click Update Now and it's downloading that material.…To this end, I've actually connected the camera to the wall power.…You don't want the battery going dead or…becoming disconnected in the middle of a software update.…That's a good way to brick a camera.…You want to make sure that it holds up…and that there's no interruption in the data flow.…
While that update is coming down, remember you can…
Author
Updated
3/22/2016Released
3/12/2014- Examining the camera bodies
- Attaching and using lenses
- Extending battery life
- Preparing SD cards for recording
- Navigating menus
- Recording audio
- Adjusting camera settings
- Monitoring and recording
- Transferring footage
- Working with DaVinci Resolve
- Keeping the camera up to date
Skill Level Intermediate
Duration
Views
Q; This course was updated on 3/31/2015. What changed?
A: We added two new chapters covering the Blackmagic URSA and Blackmagic Studio Camera.
Q: This course was updated on 03/22/2016. What changed?
A: We added eight movies to cover the new URSA Mini, Micro Studio, and Micro Cinema cameras and Blackmagic firmware changes.
Related Courses
-
Video Foundations: Interviews
with Anthony Q. Artis1h 55m Intermediate -
Video Production: Location Lighting
with Anthony Q. Artis59m 35s Intermediate -
Video Production: Location Audio Recording
with Anthony Q. Artis1h 23m Intermediate -
Lighting Design for Video Productions
with Eduardo Angel46m 22s Intermediate
-
Introduction
-
Welcome49s
-
-
1. Getting to Know the Blackmagic Cameras
-
2. Powering the Camera
-
Tips to extend battery life2m 51s
-
3. Attaching a Lens
-
Keeping the sensor clean2m 37s
-
4. Storage Requirements for Blackmagic Cameras
-
Checking disk speeds1m 13s
-
5. Blackmagic Menu System
-
Navigating menus1m 44s
-
-
6. Advanced Options to Solve Problems
-
Getting focus5m 55s
-
Making adjustments3m 6s
-
7. Capturing Audio
-
Using the built-in mic2m 35s
-
Attaching a microphone2m 4s
-
Setting microphone levels6m 17s
-
-
8. Adjusting Recording Settings
-
Choosing a recording format1m 35s
-
-
9. Monitoring and Recording
-
Monitoring dynamic range2m 2s
-
Using the built-in slate2m 23s
-
Using Blackmagic UltraScope11m 2s
-
-
10. Transferring Footage and Getting the Footage Off the Camera
-
Transferring files from SSD1m 10s
-
-
11. An Introduction to DaVinci Resolve with Robbie Carman
-
Introduction to Resolve2m 31s
-
Resolve for editors5m 19s
-
-
12. Keeping a Blackmagic Camera Up to Date
-
Updating a Cinema Camera3m 33s
-
13. The Blackmagic URSA
-
14. The Blackmagic Studio Camera
-
15. The Blackmagic URSA Mini
-
16. The Blackmagic Micro Studio Camera and Micro Cinema Camera
-
Conclusion
-
Wrapping up40s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Updating a Cinema Camera