…When it comes to power, the cinema…camera and the production camera are essentially identical.…Same form factor, same limitations.…Now, the camera itself, just like the pocket cinema cameras, it's…pretty easy to turn on, both cameras just have a power button.…And, you could press and hold, and after…holding for two seconds, it should turn on.…Easy enough.…And if you want to turn it off, same thing, just press and hold that button.…Now, the camera runs off of an internal battery.…
There is no way to access the internal battery.…I see this as a distinct disadvantage.…Think about your cell phone or your laptop.…On day one, the battery has tremendous capacity and it holds the most power.…But over time as you continue to use it, it starts…to hold less and less charge, and becomes less and less efficient.…Now, the camera itself comes with a…power supply, much like the pocket cinema camera.…It's a little bit beefier and it devotes a little bit more power.…
The power supply has the ability to switch off the…types of plugs, depending upon the international standards that you're using.…
Author
Updated
3/22/2016Released
3/12/2014- Examining the camera bodies
- Attaching and using lenses
- Extending battery life
- Preparing SD cards for recording
- Navigating menus
- Recording audio
- Adjusting camera settings
- Monitoring and recording
- Transferring footage
- Working with DaVinci Resolve
- Keeping the camera up to date
Skill Level Intermediate
Duration
Views
Q; This course was updated on 3/31/2015. What changed?
A: We added two new chapters covering the Blackmagic URSA and Blackmagic Studio Camera.
Q: This course was updated on 03/22/2016. What changed?
A: We added eight movies to cover the new URSA Mini, Micro Studio, and Micro Cinema cameras and Blackmagic firmware changes.
Related Courses
-
Video Foundations: Interviews
with Anthony Q. Artis1h 55m Intermediate -
Video Production: Location Lighting
with Anthony Q. Artis59m 35s Intermediate -
Video Production: Location Audio Recording
with Anthony Q. Artis1h 23m Intermediate -
Lighting Design for Video Productions
with Eduardo Angel46m 22s Intermediate
-
Introduction
-
Welcome49s
-
-
1. Getting to Know the Blackmagic Cameras
-
2. Powering the Camera
-
Tips to extend battery life2m 51s
-
3. Attaching a Lens
-
Keeping the sensor clean2m 37s
-
4. Storage Requirements for Blackmagic Cameras
-
Checking disk speeds1m 13s
-
5. Blackmagic Menu System
-
Navigating menus1m 44s
-
-
6. Advanced Options to Solve Problems
-
Getting focus5m 55s
-
Making adjustments3m 6s
-
7. Capturing Audio
-
Using the built-in mic2m 35s
-
Attaching a microphone2m 4s
-
Setting microphone levels6m 17s
-
-
8. Adjusting Recording Settings
-
Choosing a recording format1m 35s
-
-
9. Monitoring and Recording
-
Monitoring dynamic range2m 2s
-
Using the built-in slate2m 23s
-
Using Blackmagic UltraScope11m 2s
-
-
10. Transferring Footage and Getting the Footage Off the Camera
-
Transferring files from SSD1m 10s
-
-
11. An Introduction to DaVinci Resolve with Robbie Carman
-
Introduction to Resolve2m 31s
-
Resolve for editors5m 19s
-
-
12. Keeping a Blackmagic Camera Up to Date
-
Updating a Cinema Camera3m 33s
-
13. The Blackmagic URSA
-
14. The Blackmagic Studio Camera
-
15. The Blackmagic URSA Mini
-
16. The Blackmagic Micro Studio Camera and Micro Cinema Camera
-
Conclusion
-
Wrapping up40s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Powering the Cinema Camera and Production Camera