- So now that we've got some structures in our drawing,…let's take a look at how to create pipes that connect them.…I'll zoom in to the area where…we created our two structures in the previous video.…And you can see one here, and one here.…And what we we ultimately want to do…is we want to collect drainage in this inlet,…pipe it over to this inlet,…which will also be collecting some drainage,…and then ultimately we want to dump that drainage…out into this pond, where it can be treated,…slowed down, and discharged into the environment safely.…
So to get started I need to make an important distinction…that we're not creating a network,…we're actually going to be modifying an existing network.…And it's important that you realize that.…So you might say, well let's do what we did…in the last video, and go up to Pipe Network…and Pipe Network Creation Tools.…But, if you recall, the first thing that came up…when we launched that command…was to name the Network and choose some settings…that have to do with it.…Which is proof that we're creating…
Author
Released
1/22/2016- Understanding structures, pipes, and parts lists
- Creating pipe networks
- Creating pipes and pipe structures
- Drawing a pipe network in profile view
- Editing structures and pipes with grips
- Swapping parts
- Splitting and merging networks
- Editing pipe networks with properties and panoramas
- Controlling the display of pipe networks
- Annotating pipe networks
- Creating and managing a parts list
- Analyzing a pipe network
Skill Level Intermediate
Duration
Views
Related Courses
-
Civil 3D: Basic Roadway Design
with Eric Chappell2h 47m Beginner -
Learning Civil 3D
with Jon Michael Roberts2h 31m Beginner -
Civil 3D 2016 Essential Training
with Jeff Bartels13h 49m Intermediate -
InfraWorks 2016 Essential Training
with Eric Chappell7h 11m Beginner
-
Introduction
-
Welcome40s
-
-
1. Getting Started
-
Understanding structures4m 22s
-
Understanding pipes4m 5s
-
Understanding parts lists3m 18s
-
Creating a composite surface4m 37s
-
2. Creating Pipe Networks
-
Creating pipes by layout5m 58s
-
3. Editing Pipe Networks
-
Editing pipes using grips5m 41s
-
Swapping parts3m 17s
-
Splitting a network3m 32s
-
Merging a network3m 35s
-
Changing pipe direction2m 18s
-
4. Displaying and Annotating Pipe Networks
-
Editing labels in Plan view6m 14s
-
Creating pipe network tables3m 10s
-
5. Creating and Managing a Parts List
-
Creating a new parts list1m 30s
-
Adding a part family3m 59s
-
Configuring a part6m 35s
-
Introduction to Part Builder5m 26s
-
6. Analyzing a Pipe Network
-
Illustrating a pipe crossing4m 40s
-
Applying pipe rules6m 41s
-
Quantity Take Off6m 31s
-
-
Conclusion
-
Next steps54s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating pipes by layout