In this demonstration, Russ takes you through the configuration of EIGRP on multiple routers. Learn how to configure EIGRP for multiple routers in your autonomous system.
- [Instructor] All right, so we've talked enough…about EIGRP.…Let's actually do something here.…So just like before,…the first thing I want to do is show ip interface brief.…It shows me the interfaces…and the IP addresses assigned to it.…And show cdp neighbors.…This shows me who I'm next to.…Now, I'm here on R2...…Oh, show cdp neighbors. (laughs)…Forgot that last part, didn't I?…So here I can see that we're neighbors with R1, R6, and R5.…Now, R1 and R2 have an OSPF thing going,…and we're not going to interfere with that.…
But R6 and R5,…I want to set up EIGRP.…So let's go ahead and do that now.…First thing we're going to do, show ip route.…Let's make sure we have a way to get to R6 and R5.…You can see we have the OIA routes.…We have 26.0 and 10.25.0.…So 10.26.0 and 10.25.0 both connect to those interfaces…that lead me down to R6 and R5.…Great, we're on the right track.…So what I need to do is come up…with the actual EIGRP configuration.…
We're going to start with conf t, configure terminal,…and then we're going to go ahead…
Author
Released
10/30/2017- Static routing
- Dynamic routing
- Interior vs. exterior routing protocols
- InterVLAN routing
- OSPF routing
- EIGRP routing
- Other routing protocols
Skill Level Intermediate
Duration
Views
Related Courses
-
Cisco ICND2 Cert Prep: Switching
with Russell Long2h 20m Intermediate -
Cisco ICND2 Cert Prep: Infrastructure Services
with Russell Long2h 8m Intermediate
-
Introduction
-
Welcome1m 2s
-
What you need to know2m 30s
-
-
1. Routing
-
Routing basics10m 12s
-
Dynamic routing protocols3m 38s
-
-
2. InterVLAN Routing
-
Router on a stick6m 22s
-
Configuration demo4m 34s
-
Switch level routing2m 57s
-
-
3. OSPF
-
The basics of OSPF5m 2s
-
Cost calculations5m 47s
-
Areas and LSAs10m 45s
-
OSPF configuration demo10m 42s
-
OSPF troubleshooting6m 18s
-
DR and BDR6m 53s
-
Cost manipulation7m 23s
-
-
4. EIGRP
-
The basics of EIGRP6m 24s
-
The EIGRP metric10m 20s
-
Adjacencies6m 9s
-
Load balancing5m 32s
-
EIGRP configuration demo6m 30s
-
-
5. Other Protocols
-
RIP, BGP, and MPLS6m 57s
-
-
Conclusion
-
Next steps2m 33s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: EIGRP configuration demo