From the course: Cisco CCNP ENARSI v1.1 (300-410) Cert Prep: 1 Layer 3 Technologies

Unlock this course with a free trial

Join today to access over 22,600 courses taught by industry experts.

PBR configuration

PBR configuration

From the course: Cisco CCNP ENARSI v1.1 (300-410) Cert Prep: 1 Layer 3 Technologies

Start my 1-month free trial Buy for my team

PBR configuration

“

- [instructor] Now that we've talked about the theory, of policy based routing or PBR, let's set it up. Take a look at this typology on screen. We've got a PC that wants to get down to the server. And there are two ways it could get there. It's going to go to a default gateway, which is R1, then we have a choice to make, are we going to go to a next top of BB2 or BB1 and then down to the server? Well, I'm running OSPF as the routing protocol between R1 and BB1 and BB2, and yes I have changed the reference bandwidth, so that OSPF can tell the difference between, the 100 meg link and the gig link. Remember by default, it considers both of those to have a cost of one, but I adjusted the reference band with, so it really does prefer the gig link. And that's the path we're going to be taking. We're going to go from the PC to R1, and it's going to say the cost is less, if I go to BB2 and then out to the server. But…

Contents