From the course: CATIA V5: Design for Injection Molding
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
Creating the ribs - CATIA Tutorial
From the course: CATIA V5: Design for Injection Molding
Creating the ribs
- [Narrator] Now I need to build my stiffening ribs. I'm going to use a similar technique that I did with the bosses. I'm going to insert a body and... I'm going to create a sketch. I'll use the access system that is defining the... outermost or topmost boss here. Just go to the XY plane and select OK. To define these, I'm just going to draw a few lines. So I'll double-click on the line function and come up, and down, and over. To constrain this, you'll notice that when I drew this in, I got these constraints down to the center point here off of my sketch. And I'm going to go ahead and show these mounting points real quick. So my mounting point three, way over here, and just constrain to these points. Last thing I need to do is constrain the lengths of these ribs. So to do so, I'm just going to go into my B-Side. I'm going to show this boundary. Remember, that boundary's off of the original surface and it's a stable element, so I just dimension back to the boundary itself. Now, as I…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Creating the B side4m 32s
-
(Locked)
Part thickness: Shell method2m 57s
-
Part thickness: Core cavity design3m 35s
-
(Locked)
Interfaces4m 15s
-
(Locked)
Setup for bosses and ribs3m 36s
-
(Locked)
Creating the bosses4m 21s
-
(Locked)
Boss removal3m 27s
-
(Locked)
Creating the ribs3m 56s
-
(Locked)
A-side cleanup3m 43s
-
(Locked)
-
-