From the course: Rhino 6: Tips, Tricks, and Techniques
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
ToasterBot 04: Creating recessed openings - Rhino Tutorial
From the course: Rhino 6: Tips, Tricks, and Techniques
ToasterBot 04: Creating recessed openings
- [Narrator] We learned earlier how to make openings with no inside surface. This lets us simulate the wall thickness quickly for review purposes or design evaluations. In this video we create an opening that does include the inside face. Plus a really cool trick to get it done. Let's go to the area I'm talking about it's going to be in the back. So quickly you'll notice this recessed detail wraps nicely all the way around and we've got the uniform depth which would just be impossible if we had done any other way. So we're all familiar with curves and projecting. But in this case I'm just going to use a technique where I overlap project. So lets go to the working layer and start this process. I'm going to turn off the final, we were just looking at. And you'll see these curves here one, two, three I'm going to actually turn off that layer. I'm going to make some brand new ones. So we do need to be in the correct view .…
Contents
-
-
What are degrees and why should I care?5m 17s
-
(Locked)
Edit > ReBuild with curves6m 41s
-
(Locked)
Edit > ReBuild with surfaces5m 13s
-
(Locked)
Edit > ReBuild command alternatives6m 15s
-
(Locked)
Quiz demo: Curvy cross1m 31s
-
(Locked)
Quiz demo: Symmetrical soap8m 19s
-
(Locked)
Quiz demo: Triple pod thing12m 16s
-
(Locked)
ToasterBot 01: Introduction and overview2m 56s
-
(Locked)
ToasterBot 02: Building the enclosure8m 2s
-
(Locked)
ToasterBot 03: Creating simple openings8m 23s
-
(Locked)
ToasterBot 04: Creating recessed openings7m 3s
-
(Locked)
ToasterBot 05: Cooking up bread6m 58s
-
(Locked)
ToasterBot 06: Building a lever8m 5s
-
(Locked)
ToasterBot 07: Making a retro knob8m 12s
-
(Locked)
ToasterBot 08: Modelling eyes7m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align the viewport camera4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align your camera viewport at any angle4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Creating coiled tubing for your science lab7m 1s
-
(Locked)
Make a 3D spiral ramp7m 32s
-
(Locked)
Dont forget to make reminders7m 34s
-
(Locked)
Save time with curve Booleans4m 8s
-