Learn how radiography is similar to x-ray vision.
- [Instructor] Radiography, often referred to as X-ray,…is a very useful NDI method…because it essentially allows a view…into the interior of the part.…This inspection method is accomplished by passing…X-rays through the part or assembly being tested…while recording the absorption of the X-rays onto a film…sensitive to the X-rays.…The exposed film, when developed, allows the inspector…to analyze variations in the opacity of the exposure…recorded onto the film,…in effect, creating a visualization of the relationship…of the component's internal detail.…
Internal anomalies such as delaminations on corners,…core damage, crushed or blown,…water damage, voids.…Oftentimes these will happen with foam adhesive joints.…Adhesive joints and configuration issues can be detected.…Radiography is not the preferred method for plane defects…like delaminations.…
- What is a composite?
- Where composites are used
- Composite materials
- Composite manufacturing methods
- Inspection methods
- Repairing composites
Skill Level Beginner
Rapid Prototyping for Product Designwith Gabriel Corbett1h 38m Appropriate for all
Design for Additive Manufacturing: FDMwith Kacie Hultgren1h 47m Intermediate
3. Manufacturing Methods
4. Inspection Methods
5. Damage Types
6. Repair Methods
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.