What is a defect and how do you find it without destroying your parts to find them?
- [Instructor] Defects can be classified by their origin.…Manufacturing defects are defects…from the raw materials, the resins, the fibers,…the matrix as well as defects during…the manufacturing of the composite.…You have issues with the cure cycle,…the resin application and or foreign objects.…We also have on-service defects.…These are from normal operation or accidents.…Non-Destructive Inspection methods…give us away to verify that there are no defects.…
These non-destructive methods will help us check…to make sure that the composite is built…with the necessary properties…that we've engineered into the composite.…We verify that the structure,…the sandwich configurations and everything else…that has gone into the composite…is built correctly and will survive…based off of our load case.…
- What is a composite?
- Where composites are used
- Composite materials
- Composite manufacturing methods
- Inspection methods
- Repairing composites
Skill Level Beginner
Rapid Prototyping for Product Designwith Gabriel Corbett1h 38m Appropriate for all
Design for Additive Manufacturing: FDMwith Kacie Hultgren1h 47m Intermediate
3. Manufacturing Methods
4. Inspection Methods
5. Damage Types
6. Repair Methods
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.