Learn how compression molding is a good technique to manufacture large and intricate parts with higher run rates.
- [Instructor] Laminates can be fabricated…on a tooling surface with a matching part…or a negative part that will compress both together.…This is typically used for wet layups.…Parts can also be pressed together with clamps.…This technique is commonly used for solid, laminate edges…of honeycomb panels and things with small components.…The main design consideration with this…when you are using clamps is that you…distribute the pressure using distribution pads.…
If you don't, you actually may cause damage…to your component because of very high clamping forces.…
- What is a composite?
- Where composites are used
- Composite materials
- Composite manufacturing methods
- Inspection methods
- Repairing composites
Skill Level Beginner
Rapid Prototyping for Product Designwith Gabriel Corbett1h 38m Appropriate for all
Design for Additive Manufacturing: FDMwith Kacie Hultgren1h 47m Intermediate
3. Manufacturing Methods
4. Inspection Methods
5. Damage Types
6. Repair Methods
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.