From the course: AutoCAD Electrical Essential Training
Unlock the full course today
Join today to access over 22,700 courses taught by industry experts or purchase this course individually.
Working with revision clouds
From the course: AutoCAD Electrical Essential Training
Working with revision clouds
- [Instructor] You'll notice in the Project Manager that we're staying in project zero zero five and we're still in the control drawing. Control dot D-W-G. And what we're going to look at is one of the newer features in the later versions of AutoCAD Electrical. And that's how Autodesk have tweaked the Revision Cloud command a little bit. To allow you to add Revision Clouds to your revised AutoCAD Electrical drawings. So what we're going to do, we're going to zoom in on the middle right area here. On this particular piece of this schematic drawing here. So let's zoom in. And you can see there that we've got some PLCs going on. So I'm going to zoom in on the top of this PLC here, PLC261. And what we're going to do, we're going to place a Revision Cloud just around the top of it where it's been named and numbered. So that it goes on the latest revision of our AutoCAD Electrical drawing. Now to do that we'll just stay on layer…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.
Contents
-
-
(Locked)
Use dashed link lines4m 23s
-
(Locked)
3-phase ladders4m 5s
-
(Locked)
Multiple Wire Bus dialog2m 42s
-
Use 3-phase components3m
-
(Locked)
Number 3-phase wiring3m 12s
-
(Locked)
Use cable markers3m 22s
-
(Locked)
WBLOCK circuits2m 53s
-
(Locked)
Work with saved circuits3m 12s
-
(Locked)
Add saved circuits to the icon menu3m 38s
-
(Locked)
Copy and move a circuit3m 47s
-
Use the Circuit Clipboard2m 51s
-
(Locked)
Use the Circuit Builder2m 55s
-
(Locked)
-
-
Edit with the marking menu3m 47s
-
(Locked)
Use the Project Task List3m 19s
-
(Locked)
Use the SCOOT command1m 51s
-
(Locked)
Move components1m 39s
-
(Locked)
Copy components1m 24s
-
(Locked)
Align components2m 30s
-
(Locked)
Delete components2m 44s
-
(Locked)
Use the Surfer command (AESURF)3m 34s
-
(Locked)
Use the Copy Catalog Assignment4m
-
(Locked)
Copy installation and location code values3m 50s
-
(Locked)
Use the attribute editing commands3m 4s
-
-
-
(Locked)
Update and retag projects2m 27s
-
(Locked)
Use project-wide utilities1m 28s
-
(Locked)
Plot projects2m 29s
-
(Locked)
Export projects to spreadsheets1m 40s
-
(Locked)
Update a project from a spreadsheet3m 30s
-
(Locked)
Copy a project3m 8s
-
(Locked)
Swap and update blocks3m 44s
-
(Locked)
Mark and verify drawings3m 55s
-
(Locked)