From the course: AutoCAD Electrical Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Work with saved circuits
From the course: AutoCAD Electrical Essential Training
Work with saved circuits
- [Instructor] In the previous video, what we did was, we W blocked our circuit from our drawing. So we're in the demo 11 drawing at the moment, and we W blocked this part of the circuit here, with the motor on it. So if we just zoom out slightly and pan up a little, what I can do now is insert that circuit from the W block by giving AutoCAD Electrical that W block name. I do that by going into the schematic tab here on the ribbon, click on this fly-out menu here, and insert W block circuit. Now, I'm asked for the block name down on the command line and that is circuit one, I think you remember doing that in the previous video. So if we put circuit one in there and press enter, it automatically goes to look for that circuit in the demo folder where the rest of the project is. I'm going to leave all of this information in the dialog box as it is, I want the scales to be one to one, so I want it the same size as everything else. I'm going to update the circuit's text layers as required.…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
(Locked)
Use dashed link lines4m 23s
-
(Locked)
3-phase ladders4m 5s
-
(Locked)
Multiple Wire Bus dialog2m 42s
-
Use 3-phase components3m
-
(Locked)
Number 3-phase wiring3m 12s
-
(Locked)
Use cable markers3m 22s
-
(Locked)
WBLOCK circuits2m 53s
-
(Locked)
Work with saved circuits3m 12s
-
(Locked)
Add saved circuits to the icon menu3m 38s
-
(Locked)
Copy and move a circuit3m 47s
-
Use the Circuit Clipboard2m 51s
-
(Locked)
Use the Circuit Builder2m 55s
-
(Locked)
-
-
-
-
-
-
-
-
-
-
-
-