From the course: AutoCAD 2019 Essential Training

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Using Trim and Extend

Using Trim and Extend - AutoCAD Tutorial

From the course: AutoCAD 2019 Essential Training

Start my 1-month free trial

Using Trim and Extend

“

- [Narrator] Once again, we're staying in the ModifyingObjects.DWG file, and I've left it in exactly the same state as it was at the end of the last video. In fact, I've even left the modify flyout menu pinned open up here at the top of the screen. So click on the little pin there, just to make sure that that returns back into the ribbon like so. Now, we're going to look at the trim and the extend commands available to you in AutoCAD, but before we do that, we need to do a quick little bit of copying first. So we're going to select this line here, this line here, and this line here, and we're going to copy them, so you can just do a right click and copy selection. Now make sure you get the right base point when you copy. It's this intersection right here, on the lower edge of the horizontal wall lines. So click on that intersection, and then you're going to come down here to the end point snap of the lines that we worked on previously. So click there, and that gives us some horizontal…

Contents