From the course: AutoCAD 2018 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Using Scale and Rotate - AutoCAD Tutorial
From the course: AutoCAD 2018 Essential Training
Using Scale and Rotate
- [Voiceover] We're staying in the same drawing, the 05_ModifyingObjects.dwg file. What it might be worth doing is saving this with a slightly different file name, maybe something like 05_ModifyingObjects_Complete, so that you're saving the changes as you make them when we go through each Modify command. Now I've stayed in the same zoomed view this time around just to make life easier. You can see the desks and chairs that we worked with with the Move and Copy commands earlier. Now what we're going to look at now is scaling and rotating. Again, Modify tools that are available to us on the Modify panel on the ribbon. So you go to Home tab on the ribbon. If you go to Modify, you've got things like Rotate is there, and you've got Scale right there. So what we're going to look at now is rotating and scaling. Now what I'm going to do is I'm going to look at this little table block here. I'm going to make it slightly bigger. I'm going to make it 1.25 of its original size, 25% bigger. Then…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Selecting objects6m 58s
-
(Locked)
Using Move and Copy4m 30s
-
(Locked)
Using Scale and Rotate4m 38s
-
(Locked)
Creating and using arrays8m 6s
-
(Locked)
Using Offset and Mirror4m 55s
-
(Locked)
Using Trim and Extend5m 31s
-
(Locked)
Using Stretch and Lengthen5m 48s
-
(Locked)
Using Break and Join3m 48s
-
(Locked)
Using grips and grip editing4m 55s
-
(Locked)
Using boundaries3m 14s
-
(Locked)
Using Fillet and Chamfer6m 34s
-
(Locked)
Using Divide and Measure4m 57s
-
(Locked)
Editing Polylines and Splines4m 59s
-
(Locked)
Using off-screen selection2m 20s
-
(Locked)
Using linetype gap selection2m
-
(Locked)
-
-
-
-
-
-
-
-
-
-
-
-
-