From the course: AutoCAD 2019 Essential Training
Unlock the full course today
Join today to access over 22,700 courses taught by industry experts or purchase this course individually.
Using Offset and Mirror - AutoCAD Tutorial
From the course: AutoCAD 2019 Essential Training
Using Offset and Mirror
- [Instructor] Once again, we're staying in the ModifyingObjects.dwg file. And we're going to have a look now at the Offset and Mirror commands, and what we're going to do is we're going to jump to that reception area view that we had before. So you'll notice that the drawing has been zoomed to its extents again. I'm going to go to the view drop-down here in the drawing area, custom model views, and I'm going to go to reception here on the custom model views in the drawing like so. Now, this office here that I want to have a look at, so I might just want to pan and zoom in even closer perhaps, but it just gets me close to that area on the drawing if I use the named views. It's a little bit quicker. Now, you'll notice that we've got a single line representing the internal wall at the moment, and what we're going to do we're going to use that as a center line, and we're going to utilize it so that we can offset either side to give the wall some thickness. So let's do that first. We're…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
Selecting objects5m 13s
-
(Locked)
Using Move and Copy3m 21s
-
(Locked)
Using Rotate and Scale4m 52s
-
(Locked)
Creating and using arrays5m 8s
-
(Locked)
Using Offset and Mirror4m 54s
-
(Locked)
Using Stretch and Lengthen3m 30s
-
(Locked)
Using Trim and Extend6m 31s
-
(Locked)
Using Break and Join4m 52s
-
(Locked)
Using grips and grip editing3m 27s
-
(Locked)
Using boundaries3m 52s
-
(Locked)
Using Fillet and Chamfer6m 37s
-
(Locked)
Using Divide and Measure6m 47s
-
(Locked)
Editing polylines and splines6m 1s
-
-
-
-
-
-
-
-
-
-
-
-
-