From the course: AutoCAD 2019 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Using Break and Join - AutoCAD Tutorial
From the course: AutoCAD 2019 Essential Training
Using Break and Join
- [Instructor] We're staying in the ModifyingObjects.dwg file, and what we're going to have a look at now are the Break and Join commands that are available to you in AutoCAD when you're working and editing your AutoCAD drawing. Now, you'll notice that we've got two offices there with some nice desks and chairs and so on, but there's no way of getting from one office to the other. We need an adjoining door. Now, the good thing is, we've got some doors already, and they're AutoCAD blocks, so we can copy one of these very quickly. I'm going to select this door here, right-click, Copy Selection, and I'm going to pick this point here. Now, if you want to zoom in and get a bit closer, you can see it's where the door touches the corner of the door opening, like so. You can see, there it is, ready to copy. Zoom out again, and pan a little, and we're going to just place it somewhere along this wall here. Now, you'll notice when I hover on the wall there I'm getting the endpoint. That's…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
Selecting objects5m 13s
-
(Locked)
Using Move and Copy3m 21s
-
(Locked)
Using Rotate and Scale4m 52s
-
(Locked)
Creating and using arrays5m 8s
-
(Locked)
Using Offset and Mirror4m 54s
-
(Locked)
Using Stretch and Lengthen3m 30s
-
(Locked)
Using Trim and Extend6m 31s
-
(Locked)
Using Break and Join4m 52s
-
(Locked)
Using grips and grip editing3m 27s
-
(Locked)
Using boundaries3m 52s
-
(Locked)
Using Fillet and Chamfer6m 37s
-
(Locked)
Using Divide and Measure6m 47s
-
(Locked)
Editing polylines and splines6m 1s
-
-
-
-
-
-
-
-
-
-
-
-
-