From the course: AutoCAD Electrical Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Use zoom and pan
- We're starting another chapter now in our AutoCAD Electrical Course, and we're just going to have a little look at navigating in our AutoCAD Electrical drawings. Now, it's very similar to how you would navigate your drawings in regular AutoCAD, but just remember you've got that marking menu in AutoCAD Electrical on the right-click, and that can sometimes throw a little spanner in the works, and I'll show you why in a moment. Just make sure you've got your WD demo project open, and I've got drawing demo 02 open in that project. If you haven't kept the WD demo project open from the last chapter, just make sure you go to the downloaded demo folder, and all you've got to do is open up the project again. So you go over here, open project, and you go and find the WD demo, dot WDP file, select it, click on open, and that'll open up your project again, and then just open up drawing demo O2, that one there. Now, I'm going to zoom in on some of this three phase circuitry here, and I did…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.
Contents
-
-
(Locked)
Use dashed link lines4m 23s
-
(Locked)
3-phase ladders4m 5s
-
(Locked)
Multiple Wire Bus dialog2m 42s
-
Use 3-phase components3m
-
(Locked)
Number 3-phase wiring3m 12s
-
(Locked)
Use cable markers3m 22s
-
(Locked)
WBLOCK circuits2m 53s
-
(Locked)
Work with saved circuits3m 12s
-
(Locked)
Add saved circuits to the icon menu3m 38s
-
(Locked)
Copy and move a circuit3m 47s
-
Use the Circuit Clipboard2m 51s
-
(Locked)
Use the Circuit Builder2m 55s
-
(Locked)
-
-
Edit with the marking menu3m 47s
-
(Locked)
Use the Project Task List3m 19s
-
(Locked)
Use the SCOOT command1m 51s
-
(Locked)
Move components1m 39s
-
(Locked)
Copy components1m 24s
-
(Locked)
Align components2m 30s
-
(Locked)
Delete components2m 44s
-
(Locked)
Use the Surfer command (AESURF)3m 34s
-
(Locked)
Use the Copy Catalog Assignment4m
-
(Locked)
Copy installation and location code values3m 50s
-
(Locked)
Use the attribute editing commands3m 4s
-
-
-
(Locked)
Update and retag projects2m 27s
-
(Locked)
Use project-wide utilities1m 28s
-
(Locked)
Plot projects2m 29s
-
(Locked)
Export projects to spreadsheets1m 40s
-
(Locked)
Update a project from a spreadsheet3m 30s
-
(Locked)
Copy a project3m 8s
-
(Locked)
Swap and update blocks3m 44s
-
(Locked)
Mark and verify drawings3m 55s
-
(Locked)