Join Shaun Bryant for an in-depth discussion in this video Setting up the area table style, part of AutoCAD Facilities Management: Areas.
- [Voiceover] We're starting a new chapter now…in our AutoCAD Facilities Management 101 Areas Course.…And we're going to be looking at…setting up an area table style.…So we're going to use the AutoCAD Table command…to create an area table style,…and then in the next chapter,…we'll look at using that particular area table.…Now you'll notice we've got a new drawing available,…the 00_GND_FM_TSTYLE.dwg file.…That's available in your Lynda.com exercise files,…as usual, and obviously, make sure…that you've referenced in the structural plan,…the ground floor plan, the GA drawing.…
So to check that we've done that,…we'll go to the Insert tab on the ribbon.…We go to the Reference panel, like usual,…and click on the arrow here.…And you'll notice there's the FP,…the renamed reference file,…and you'll notice it's 00_GND_GA_TSTYLE.dwg.…Again, you'll find that in your Lynda.com exercise files.…Make sure both drawings are in the same folder…and that you use the relative path method…to reference in the structural plan, the GA drawing.…
Author
Shaun Bryant
Released
8/19/2016- Setting up a facilities drawing
- Managing XREF layers
- Adjusting drawing units and limits
- Using polylines
- Defining areas
- Annotating areas
- Setting up area table styles
- Finding and linking area data
- Exporting area table data
Skill Level Appropriate for all
Duration
Views
-
Introduction
-
Welcome54s
-
Using the exercise files1m 35s
-
-
1. Introduction to FM
-
Using areas in AutoCAD4m 16s
-
Managing your areas5m 57s
-
2. Setting Up a Facilities Drawing
-
Managing XREF layers3m 55s
-
3. Getting Your FM Settings Right
-
Drawing units4m 39s
-
Drawing limits4m 28s
-
Layer naming strategy5m 19s
-
Setting gradient fills3m 13s
-
Setting hatch patterns3m 8s
-
-
4. Areas and Polylines
-
Why use polylines?5m 1s
-
Using object snaps5m 24s
-
Creating area outlines4m 42s
-
Gross external area (GEA)3m 24s
-
Gross internal area (GIA)3m 25s
-
-
5. Defining Areas
-
Methods of measurement4m 56s
-
Using draw order2m 44s
-
Using lineweight (LWT)3m 59s
-
-
6. Annotating Areas
-
Text styles7m 34s
-
Annotative scaling4m 46s
-
Using text fields5m 27s
-
Text field settings2m 39s
-
Using text symbols3m 1s
-
-
7. Setting Up an Area Table Style
-
Setting up the table title3m 13s
-
Inserting the area table3m 38s
-
8. Using the Area Table
-
9. Exporting the Area Table Data
-
Conclusion
-
Next steps1m 20s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Setting up the area table style