From the course: AutoCAD Electrical Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Set up AutoCAD Electrical titleblocks
From the course: AutoCAD Electrical Essential Training
Set up AutoCAD Electrical titleblocks
- [Instructor] We're not going to have a look at title block set up and how that works. Now we've done a title block update and made some changes. And you've seen that work in the control drawing, and obviously that'll go across project wide to the operator station drawing as well in this particular project. What I want you to do now is go up to the new icon on the quick access tool back. Click on new there, like so. And use you ACAD electrical template. That one there and click on open. Now that opens up a new blank drawing. Now it is literally a blank drawing. It's got nothing to do with AutoCAD electrical right now. So what we're going to do now, is we're going to save this drawing into our project zero zero five folder. So what we do is we do a save as, and then we're going to add that drawing to the project itself. So we do a save as here first. And there's project oh oh five. So what we'll do, we'll just call this title block for now, like so. And also as well, files try and…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.
Contents
-
-
(Locked)
Use dashed link lines4m 23s
-
(Locked)
3-phase ladders4m 5s
-
(Locked)
Multiple Wire Bus dialog2m 42s
-
Use 3-phase components3m
-
(Locked)
Number 3-phase wiring3m 12s
-
(Locked)
Use cable markers3m 22s
-
(Locked)
WBLOCK circuits2m 53s
-
(Locked)
Work with saved circuits3m 12s
-
(Locked)
Add saved circuits to the icon menu3m 38s
-
(Locked)
Copy and move a circuit3m 47s
-
Use the Circuit Clipboard2m 51s
-
(Locked)
Use the Circuit Builder2m 55s
-
(Locked)
-
-
Edit with the marking menu3m 47s
-
(Locked)
Use the Project Task List3m 19s
-
(Locked)
Use the SCOOT command1m 51s
-
(Locked)
Move components1m 39s
-
(Locked)
Copy components1m 24s
-
(Locked)
Align components2m 30s
-
(Locked)
Delete components2m 44s
-
(Locked)
Use the Surfer command (AESURF)3m 34s
-
(Locked)
Use the Copy Catalog Assignment4m
-
(Locked)
Copy installation and location code values3m 50s
-
(Locked)
Use the attribute editing commands3m 4s
-
-
-
(Locked)
Update and retag projects2m 27s
-
(Locked)
Use project-wide utilities1m 28s
-
(Locked)
Plot projects2m 29s
-
(Locked)
Export projects to spreadsheets1m 40s
-
(Locked)
Update a project from a spreadsheet3m 30s
-
(Locked)
Copy a project3m 8s
-
(Locked)
Swap and update blocks3m 44s
-
(Locked)
Mark and verify drawings3m 55s
-
(Locked)