From the course: AutoCAD: Advanced 3D Modeling
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Remove unwanted volume with Subtract - AutoCAD Tutorial
From the course: AutoCAD: Advanced 3D Modeling
Remove unwanted volume with Subtract
- [Narrator] The next element that we can model will be the controller up here in white. Let's make a new layer for that. I'll call it dash controller, and I'll give it different color. Maybe it will be green. I'll set that layer current, and right now we have, it looks like an open poly line. I'd like to have that be a closed object, so I'm going to draw a line right here, closing that off, and then I'll type J for join Enter And select the line and the poly line and press enter and they should be joined now in a closed poly line. We can verify that by selecting the object and going over to properties and seeing that it says yes under closed. If it doesn't you can just change this from no to yes. Now let's go ahead and revolve this around the axle. To do so I'm going to click right on the UCS icon and then hover the cursor over the square grip and choose move origin only and then move the origin on the end of the axle. Now I'm going to go to the solid tab and use the revolve tool and…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Position cross-sectional drawings relative to a model5m 35s
-
(Locked)
Remove unwanted volume with Subtract4m 40s
-
(Locked)
Combine surface and solid modeling3m 51s
-
(Locked)
Configure sketches of sprockets3m 2s
-
(Locked)
Fillet edges and array sprocket components5m 43s
-
(Locked)
Create the drive belt as a solid object3m 22s
-
(Locked)
Duplicate and 3D rotate the sprocket3m 51s
-
Revolve, extrude, and subtract objects5m 58s
-
(Locked)
-
-
-
-
-
-
-
-