Join Scott Onstott for an in-depth discussion in this video Next steps, part of AutoCAD: 3D Surface Model Design.
- If you'd like to learn more about AutoCAD,…I invite you to check out some…of my other AutoCAD courses in the lynda.com library.…You can also check out my personal website,…where I have all of the books that I've written listed here.…Thanks a lot for watching.…
Resume Transcript Auto-Scroll
Author
Scott Onstott
Released
11/11/2014
You can model almost any form imaginable with AutoCAD's surface toolset. In this project-based course, Scott Onstott teaches you all the techniques required to solve complex modeling challenges in AutoCAD, while focusing on an innovative ebike design. Learn to create each 3D component of the bicycle model, including its frame, belt-tensioner mechanism, drivetrain, electric-assist power components, brakes, wheels, axels, hubs, spokes, handlebars, and even the bicycle seat. The techniques (which can be applied to other mechanical models) cover extruding profiles, lofting 2D cross sections, revolving profiles around an axis, filleting edges, smoothing meshes into organic forms, and sculpting complex NURBS surfaces.
Topics include:
- Creating layers for 3D modeling
- Extracting isolines
- Trimming and extending surfaces
- Extruding 2D curves into 3D surfaces
- Lofting cross sections
- Converting solids into surfaces
- Sculpting watertight surfaces into solids
- Sweeping and sculpting
- Revolving boundaries to create surfaces
- Welding objects together with Fillet Edge
- Rebuilding NURBS surfaces
- Offsetting a surface
Skill Level Intermediate
3h 41m
Duration
64,047
Views
Show More
Show Less
-
Introduction
-
Welcome46s
-
-
1. Modeling a Bicycle Frame
-
Extracting isolines4m 10s
-
Drawing a profile6m 6s
-
Trimming surfaces4m 42s
-
Revolving profiles3m 8s
-
Lofting with the Path option2m 45s
-
2. Creating the Belt-Tensioning Mechanism
-
Extruding a region2m 32s
-
Modeling fasteners5m 30s
-
3. Building the Drivetrain Components
-
Using Booleans on 2D regions4m 35s
-
4. Modeling the Rear Brakes
-
5. Creating the Rear Wheel
-
Sweeping and sculpting6m 29s
-
6. Making the Power Components
-
Smoothing a mesh object4m 13s
-
Tilting up extruded objects4m 30s
-
7. Modeling the Front End
-
8. Creating the Handlebars
-
9. Making the Seat
-
Conclusion
-
Next steps15s
-
Show MoreShow Less
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Next steps