- [Instructor] In the previous video,…we looked at single-line text objects…that could be used with an annotative scale.…So we placed this text here, the section view text,…and if I hover over that, you can see the little annotation…symbol there is over the section view text, just there.…Now, we're on the text layer, so just check that note,…always do that sanity check.…Layers panel in the Home tab, flyout here,…just make sure you're on the text layer, like so.…Then go to the Annotation flyout here,…and make sure you're still using that TRAINING1 text style,…as per the previous video.…
So that TRAINING1 text style is annotative.…Now, multiline text is purely a different…type of text in AutoCAD.…So we should be able to place multiline text…in the same way as single-line text, and make it annotative.…So, that means it will have a paper height…that you've already specified in that annotative text style.…So, if I just pan up a little bit in the Model tab here,…I'm just going to go up like that.…So, I've got a little bit of a gap at the bottom here.…
Author
Updated
5/23/2018Released
1/25/2017- Setting up a text layer
- Setting up an annotative block and attribute
- Inserting blocks and attributes into the drawing
- Managing annotative attributes
- Setting a hatch to be annotative
- Using a dimensioning layer
- Setting up a dimensioning text style
- Adding and deleting annotative scales
- Setting up a tolerances layer
- Adding and deleting annotative scales
- Using a dimensions layer for multileaders
- Placing annotative multileaders
Skill Level Beginner
Duration
Views
Q: This course was updated on 05/23/2018. What changed?
A: WE added three videos on the new AutoCAD 2018 feature, DWG Compare, for comparing different versions of a drawing.
Related Courses
-
AutoCAD: Plotting & Publishing
with Shaun Bryant2h 33m Intermediate -
AutoCAD 2017 Essential Training
with Shaun Bryant8h 40m Intermediate
-
Introduction
-
Welcome46s
-
Using the exercise files1m 8s
-
-
1. Introduction to Annotation Scaling in AutoCAD
-
Why use annotation scaling?2m 42s
-
2. Objects That Can Be Annotatively Scaled
-
Text5m 3s
-
Multiline text3m 44s
-
Blocks and attributes4m 30s
-
Hatches3m 45s
-
Geometric tolerances4m 41s
-
-
3. Text and Annotation Scaling
-
Setting up a text layer2m 59s
-
Single-line text4m 57s
-
Multiline text3m 26s
-
Text styles4m 11s
-
-
4. Blocks and Annotation Scaling
-
Working with layer 01m 40s
-
-
5. Hatches and Annotation Scaling
-
Setting up a hatch layer1m 58s
-
-
6. Dimensions and Annotation Scaling
-
7. Tolerances and Annotation Scaling
-
8. Multileaders and Annotation Scaling
-
9. Using DWG Compare (AutoCAD 2019 Only)
-
The DWG compare command1m 59s
-
-
Conclusion
-
Next steps2m 11s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Multiline text