From the course: AutoCAD: 3D Architectural Modeling
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Model the tower walls - AutoCAD Tutorial
From the course: AutoCAD: 3D Architectural Modeling
Model the tower walls
- Now let's turn our attention to modeling the tower roof. If you look at this elevation you can see that the tower roof slopes down. It's a very gentle slope in this direction. And from the other angle the roof has a more complex shape over here. So I'd like to sketch this more complex form and trace over it. I'll go to layer zero and set that as the current layer while I'm working on this temporarily. And then note that the UCS is parallel to the sketch. Draw a polyline and trace the lower edge here of this roof going around the lowest part of it over here, and then draw a line straight down some arbratory distance like that. Now I'd like to move that polyline into position over the tower. So move last over from the sketch over this way in the blue direction using Ortho. I want to exclude the blue direction from the point filter so the point filter will be point xy in this case. Enter, at enter, and then click on the corner of the wall over here. So the sketch is now lined up with…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
(Locked)
Build the tower walls1m 37s
-
(Locked)
Cut the wraparound walls down3m 23s
-
(Locked)
Construct the first wraparound roof5m 34s
-
(Locked)
Fill in walls under the roof3m 5s
-
Make a wraparound roof with 3D poly objects5m 11s
-
(Locked)
Fill in missing wall volume2m 8s
-
(Locked)
Extend walls to meet the roof3m 13s
-
(Locked)
Cut notches for clerestory windows3m 47s
-
(Locked)
Build clerestory windows3m 46s
-
(Locked)
Model the tower walls4m 32s
-
(Locked)
Shell the tower2m 43s
-
(Locked)
Extrude the roof along a path2m 58s
-
(Locked)
-