In this video, learn how to draw simple lines, arcs, and circles.
- [Instructor] We're staying in our geometry.DWG file. … And I've just panned across slowly so that we can see … both of the new tables that we've created in our floor plan. … Now we're going to have a little look now … at the geometry commands available to us in AutoCAD. … And we're going to look at lines arcs and circles. … Now, up until now, we've created these basic little tables … one square, one rectangular, and the little dash … lines indicates some inlays that might be … on those bits of furniture in our drawing. … So we're going to utilize the line command … the arc command and the circle command … just to make them look a little bit more fancy … in our AutoCAD drawing. … Now, the first command we're going to look … at is the line command. … And I'm also going to show you a neat little trick now … with object snaps … on how to place your lines in an AutoCAD drawing. … Now, before we do that, just make sure … that you're on the A700 MH FFE layer you should be anyway. … 'Cause that's the layer that I started the drawing …
Skill Level Beginner
1. The AutoCAD Interface
2. Drawing Simple Geometry
3. Annotating Simple Designs
4. Communicating Your Design Intent
Next steps1m 50s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.