Join Shaun Bryant for an in-depth discussion in this video Interface: Editing path arrays, part of AutoCAD: Tips & Tricks.
- [Instructor] So here we are again…with another AutoCAD tip and trick for the day.…And what we're going to be looking at this time…is editing path arrays.…Path arrays are really useful in AutoCAD,…because you can get objects to follow curves…like we've got here at the screen at the moment.…We've got a nice new drawing for you.…It's called EditingPathArrays, surprise.…You can download it from the library…and use it to follow along with the videos.…So we've got two little red arcs there…where we're doing a little bit of landscaping…in a garden area, perhaps for a building…or house or something similar.…
And these green landscaping rectangles and hexagons…represent paving slabs that you might use to create…paths for a landscaped area.…And obviously the red lines there are the paths…of the paths arrays.…So what we're going to do is path arrays.…Now the arrays are already in place.…There's an array there and there's an array there.…So what I want to do is I want to edit these path arrays.…So let's go with the top one,…
Author
Shaun Bryant
Updated
5/20/2020Released
10/5/2016Skill Level Intermediate
Duration
Views
Q: Why can't I earn a Certificate of Completion for this course?
A: We publish a new tutorial or tutorials for this course on a regular basis. We are unable to offer a Certificate of Completion because it is an ever-evolving course that is not designed to be completed. Check back often for new movies.
-
New This Week
-
Introduction
-
Welcome47s
-
-
May 2016
-
Using ARRAY and ARRAYCLASSIC7m 52s
-
Using FIELDS in MTEXT5m 24s
-
-
June 2016
-
July 2016
-
August 2016
-
September 2016
-
Using the MEASURE command4m 38s
-
Using the DIVIDE command4m 11s
-
October 2016
-
November 2016
-
December 2016
-
Using PDFSHXTEXT in AutoCAD4m 32s
-
Using the DIMBREAK command6m 12s
-
January 2017
-
Using the DIMSPACE command5m 46s
-
Using DesignCenter6m 6s
-
-
February 2017
-
Creating named views6m 2s
-
Working with batch plotting7m 21s
-
Working with BYLAYER5m 48s
-
March 2017
-
Using the OFFSET command4m 47s
-
April 2017
-
Using the STARTUP variable7m 29s
-
May 2017
-
June 2017
-
July 2017
-
August 2017
-
September 2017
-
Using the PUBLISH command7m 27s
-
October 2017
-
November 2017
-
December 2017
-
January 2018
-
Content: Using DWG Compare3m 20s
-
-
February 2018
-
Content: Calculating areas3m 36s
-
-
March 2018
-
April 2018
-
May 2018
-
June 2018
-
July 2018
-
August 2018
-
Using Arc Aligned4m 14s
-
Converting text to MTEXT3m 25s
-
-
September 2018
-
October 2018
-
November 2018
-
December 2018
-
January 2019
-
February 2019
-
March 2019
-
April 2019
-
May 2019
-
June 2019
-
July 2019
-
August 2019
-
September 2019
-
October 2019
-
November 2019
-
December 2019
-
January 2020
-
February 2020
-
March 2020
-
April 2020
-
May 2020
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Interface: Editing path arrays