See how to create polylines for each wall by clicking a point inside a rectangle and using the BOUNDARY command's island-detection. These polylines are extruded nine feet in elevation.
- [Instructor] Next on the agenda…are the interior partitions.…Let's take a look at those.…Currently, these are on the 2D I-WALL layer…which stands for interior walls.…And I'd like to isolate that first.…So I'll type, lay iso Enter.…And click on one of these yellow lines and press Enter.…So there we have the interior partitions on this floor.…And you'll notice that these are separate pieces.…We have arcs and lines representing these objects.…
So what we need to do first, before we generate a 3D model,…is to generate polylines for the best results.…And what we need to do is look at that in the Top View.…I'll go in the Top View here and zoom in…to the first floor plan which has the curved walls here.…We also need a new layer to put the new objects on.…So, let's go over to the layer properties manager,…click on the All filter, create the new layer,…call it -WALL-INTERIOR.…
Turn that layer on, and let's also change the color…to green and go back and set that as the current layer.…And then I'd like to use the Boundary command…
Author
Scott Onstott
Released
1/3/2019- Arranging elevations and sections around a plan
- Rotating objects in 3D
- Extruding walls, interior partitions, and headers
- Building slabs
- Modeling doors, windows, and stairs
- Sculpting terrain
- Creating a second floor
- Building roof surfaces
- Sculpting solids from regions and surfaces
- Modeling a tower
Skill Level Intermediate
Duration
Views
-
Introduction
-
What you should know1m 16s
-
1. Clean Up 2D Drawings
-
2. Model the Ground Floor
-
Navigate in 3D5m 55s
-
Rotate objects in 3D3m 40s
-
Extrude interior partitions2m 53s
-
Model curved headers3m 30s
-
Build the slab on grade4m 57s
-
3. Model Doors, Windows, and Stairs
-
Model doors with glazing7m 56s
-
Model a window5m 24s
-
Copy window groups2m 26s
-
Subobject manipulation5m 59s
-
Model stairs from plans5m 3s
-
Support the handrail6m 12s
-
-
4. Model Terrain Surfaces
-
Sculpt a sloping terrain4m 55s
-
5. Model the Second Floor
-
Extrude a walkway3m 33s
-
Create door headers1m 46s
-
6. Complete the Second Floor and Roof
-
Build interior partitions3m 47s
-
Cut window openings5m 20s
-
Create custom windows7m 35s
-
Build roof surfaces4m 41s
-
-
7. Model the Tower
-
Build the tower walls1m 37s
-
Build clerestory windows3m 46s
-
Model the tower walls4m 32s
-
Shell the tower2m 43s
-
-
Conclusion
-
Next steps43s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Extrude interior partitions