From the course: AutoCAD 2021 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Editing polylines and splines - AutoCAD Tutorial
From the course: AutoCAD 2021 Essential Training
Editing polylines and splines
- [Instructor] Last but not least in this chapter, we're going to look at editing polylines and splines. And, we're staying in the same view that we've got already on the screen. You're zoomed in on that bottom left area of the floor plan. Make sure that your draw panel here is also expanded out and pinned open because you will need some of the commands on the pinned out area of the draw panel. Now, you'll remember that we've got our polyline, and we've brought it back in here like so. And, we've also got our setting out points. This setting out point isn't needed. It can be deleted. And, this line here can also be deleted as well. What we're going to do there is make sure that we're on this layer here. So, we go up to make current, and we select this line here just to make sure that we're on the appropriate layer. We're then going to go to the draw panel. And, what we're going to do is we're going to select this command…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Selecting objects5m 26s
-
(Locked)
Using Move and Copy3m 35s
-
(Locked)
Using Rotate and Scale5m 49s
-
(Locked)
Creating and using arrays6m 45s
-
(Locked)
Using Offset and Mirror5m 7s
-
(Locked)
Using Stretch and Lengthen5m 14s
-
(Locked)
Using Trim and Extend5m 9s
-
(Locked)
Using Break and Join4m 11s
-
(Locked)
Using grips and grip editing4m 2s
-
(Locked)
Using boundaries4m 8s
-
(Locked)
Using Fillet and Chamfer5m 9s
-
(Locked)
Using Divide and Measure5m 24s
-
(Locked)
Editing polylines and splines5m 53s
-
-
-
-
-
-
-
-