From the course: AutoCAD: Advanced 3D Modeling
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Draw cross sections along a spline - AutoCAD Tutorial
From the course: AutoCAD: Advanced 3D Modeling
Draw cross sections along a spline
- [Instructor] Let's consider this bottom part of the rear triangle. I'll go back to the layers, control and unisolate all the layers. And let's visualize what we need here. So we have this element, shown in cyan, which is the bottom of the rear triangle. And it has to start here at this red bracket, on the frame. And it has to quickly rise above the rear tire, and rise up to a height of 70 millimeters above the sketches here, where it ends at this element, which is the belt tensioner. So let's go ahead and isolate these layers here. And press enter. I'd also like to see the two dimensional frame layer. So let's turn that on as well. And that should give us enough information to go on. So now I'm going to create a new layer. So right now the cyan layer is called Triangle Bottom. I'll select that and create a new layer called dash Triangle Bottom. And I'll give that a different color, let's say it's yellow. And I'd also like to make that current, so I'll go to the 3D Layers, Filter…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
(Locked)
Extrude and patch a surface2m 42s
-
(Locked)
Manipulate the user coordinate system5m 49s
-
(Locked)
Use Offset and regions to generate surfaces5m 50s
-
(Locked)
Sweep a profile along a curved path3m 48s
-
(Locked)
Extrude and trim surfaces1m 59s
-
(Locked)
Revolve profiles3m 1s
-
(Locked)
Extrude a profile along a curved path5m 4s
-
(Locked)
Draft multiple cross sections7m 15s
-
Loft surfaces from cross sections6m 56s
-
(Locked)
Draw cross sections along a spline3m 49s
-
(Locked)
Loft with the Path option2m 23s
-
(Locked)
-
-
-
-
-
-
-
-
-
-