In this video, Shaun Bryant explains how to create a new fill pattern that would replicate your AutoCAD hatch patterns to change the fill pattern being used in a Revit filled region.
- [Instructor] So we're staying in our 00 ground floor plan…in our Revit project, and what we're going to look at now…is creating a new fill pattern.…And then we'll use the filled region command…to obviously highlight that pattern…in our ground floor plan.…So we go to the manage tab on the ribbon…and we go to additional settings and into our fill patterns.…Now again, I've got this sort of top left so that you can…still see what's going on in the floor plan.…And what we can do is we can create a new fill pattern.…Now this is where again you can relate this back…to the standards in your autoCAD drawings…that might be getting used for your Revit project.…
The whole idea is that you've got the ability…to replicate the same fill patterns that might be…getting used for hatching…in older autoCAD drawings that might be used for this…project, or they might be linked or imported.…So, what sort of pattern type do you want?…Do you want a drafting pattern type,…or a model pattern type?…So you come down to the bottom of the fill patterns…
Author
Released
8/16/2018- Communicating your design intent from Revit to AutoCAD
- AutoCAD layers as standards
- Bringing your AutoCAD layers into Revit
- Importing and linking a CAD file
- Managing a linked CAD file
- Setting up standards for layers in AutoCAD
- Line styles, weights, and patterns
- Creating standard details in Revit
- Using text colors and settings
- Creating and duplicating fill patterns
Skill Level Intermediate
Duration
Views
Related Courses
-
BIM Manager: Managing Revit
with Eric Wing2h 41m Intermediate -
AutoCAD: Developing CAD Standards
with Shaun Bryant3h 3m Intermediate -
AutoCAD 2019 Essential Training
with Shaun Bryant7h 26m Beginner
-
Introduction
-
1. Why Migrate Your AutoCAD Standards into Revit?
-
2. AutoCAD Layers As Standards
-
Layer naming philosophy3m 45s
-
Layer colors3m 49s
-
Layer linetypes5m 50s
-
Layer lineweights4m 6s
-
Using the BYLAYER settings4m 48s
-
3. Bringing Your AutoCAD Layers into Revit
-
Importing a CAD file5m 28s
-
Linking a CAD file4m 51s
-
Querying CAD layers5m 14s
-
Managing a linked CAD file5m 13s
-
Exploding a CAD file5m 50s
-
-
4. Setting Up Your Layers to Industry Standards
-
5. Using Additional Settings in Revit
-
Additional settings in Revit2m 33s
-
Fill patterns4m 38s
-
Line styles3m 30s
-
Lineweights3m 1s
-
Line patterns2m 56s
-
Halftone/Underlay3m 47s
-
-
6. Creating Standard Details in Revit
-
Creating a new drafting view2m 38s
-
-
7. Working with Imported Categories
-
Visibility3m 5s
-
Using object styles6m 21s
-
Halftone2m 56s
-
8. Annotation
-
Text families3m 45s
-
Text fonts and sizes5m 53s
-
Using text colors3m 55s
-
9. Working with Fill Patterns
-
Editing fill patterns4m 52s
-
Creating a new fill pattern5m 52s
-
Duplicating a fill pattern4m 37s
-
Conclusion
-
Next steps1m 18s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating a new fill pattern