From the course: AutoCAD: Advanced 3D Modeling
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Copy and reposition the front brake calipers - AutoCAD Tutorial
From the course: AutoCAD: Advanced 3D Modeling
Copy and reposition the front brake calipers
- [Instructor] The last thing that we need to attend to, in the front axil area, are the break calipers. And we have the drawing here that shows that it's identical to the break caliper that we already made for the rear wheel. So there's no sense in remodeling this here, when we can just go ahead and copy the break caliper that we've already made. So I'm just going to zoom in here and locate that. I'll copy this object, and I'm going to grab it from it's plan representation. So I'm going to grab it from, let's say the center of this sketch, and then I'll just navigate over to the other side, zoom in here. And I'm going to place that right in the center of this sketch and press enter to end the copy command. Now I'd like to look at that from the top view. I'll reset the UCS by typing UCS, Enter, Enter. And then click on the top of the view cube, and zoom in and then change the visual style to wireframe, and then rotate this object. Enter. From it's center point, and I'll turn off…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
Loft cross sections to create a complex form5m 4s
-
(Locked)
Clean up 2D entities in preparation for 3D modeling7m 10s
-
(Locked)
Revolve boundaries to create surfaces5m 52s
-
(Locked)
Copy components from the rear to front axle4m 16s
-
(Locked)
Model the front hub5m 5s
-
(Locked)
Sweep spokes along 3D paths9m 57s
-
(Locked)
Adjust the front axle, acorn nuts, and spacer7m 47s
-
(Locked)
Copy and reposition the front brake calipers4m 54s
-
(Locked)
Copy the rim and tire to the front3m 12s
-
-
-
-
-