See how to copy the ceiling, thicken it with PRESSPULL, create a layer, change the copied ceiling's layer assignment, and move it into position as the second floor slab.
- [Instructor] Next up is the second floor slab,…and we can simply copy the ceiling up…and change its layer to create the slab.…I'm going to use the copy command…and select this cyan-colored 3D solid.…I'll just copy that up using Ortho…some arbitrary distance above,…and then let's take a look at the thickness of this.…So I'm going to use the distance command, DI,…and you can see that this is two inches thick.…I want this slab to be six inches thick.…
So I'm going to use the PRESSPULL command.…Type PRESS, Enter,…click on this surface,…and pull it up and type four, Enter,…to thicken it to a total of six inches thick.…Next let's go over to the layer properties manager…and let's click on the floor layer,…create a new layer underneath that,…and call it dash FLOOR2.…And while I'm at it,…I'm going to rename the original floor layer FLOOR1.…
So FLOOR2 is also going to be yellow,…and I don't necessarily need to set that…as the current layer…because all I need to do is change the layer assignment…of this object.…So I'll type QP for quick properties, Enter,…
Author
Released
1/3/2019- Arranging elevations and sections around a plan
- Rotating objects in 3D
- Extruding walls, interior partitions, and headers
- Building slabs
- Modeling doors, windows, and stairs
- Sculpting terrain
- Creating a second floor
- Building roof surfaces
- Sculpting solids from regions and surfaces
- Modeling a tower
Skill Level Intermediate
Duration
Views
Related Courses
-
AutoCAD: 2D & 3D Elevations
with Shaun Bryant2h 58m Intermediate -
AutoCAD: Construction Drawings
with Shaun Bryant3h 18m Intermediate -
AutoCAD Add-ins Using VB.NET
with Josh Modglin4h 26m Intermediate -
AutoCAD: Advanced Workflow with Sheet Sets
with Shaun Bryant2h 52m Intermediate
-
Introduction
-
What you should know1m 16s
-
1. Clean Up 2D Drawings
-
2. Model the Ground Floor
-
Navigate in 3D5m 55s
-
Rotate objects in 3D3m 40s
-
Extrude interior partitions2m 53s
-
Model curved headers3m 30s
-
Build the slab on grade4m 57s
-
3. Model Doors, Windows, and Stairs
-
Model doors with glazing7m 56s
-
Model a window5m 24s
-
Copy window groups2m 26s
-
Subobject manipulation5m 59s
-
Model stairs from plans5m 3s
-
Support the handrail6m 12s
-
-
4. Model Terrain Surfaces
-
Sculpt a sloping terrain4m 55s
-
5. Model the Second Floor
-
Extrude a walkway3m 33s
-
Create door headers1m 46s
-
6. Complete the Second Floor and Roof
-
Build interior partitions3m 47s
-
Cut window openings5m 20s
-
Create custom windows7m 35s
-
Build roof surfaces4m 41s
-
-
7. Model the Tower
-
Build the tower walls1m 37s
-
Build clerestory windows3m 46s
-
Model the tower walls4m 32s
-
Shell the tower2m 43s
-
-
Conclusion
-
Next steps43s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Copy the ceiling to create a new floor