In this video, see how to build a run of clerestory windows by extruding regions. You can infill these with glazing and group the assembly. You can then move the group into position inside the notch cut into the wall for this purpose.
- [Instructor] Lets go ahead and model…the clerestory windows themselves.…And I'd like to start with this sketch up here.…We see a bank of windows.…I'll begin by sketching in the windows on the proper layer.…So, I'm going to go to the 3D WINDOW Layer,…and make sure that the UCS is parallel with the sketch.…It looks like it is.…So I can draw in a rectangle here.…Representing the outer most part of that frame.…And then I'll draw rectangles in…each one of these glazed windows.…
To save time, I'll just COPY the last object…from this location over and I'll use the Array option.…Let's say we want 10 items, I'm not sure how many.…And I'm going to over estimate it and then I'll click…right here to copy those over.…Then I can go ahead and erase any extras that we have.…Let's turn off these layers.…I'll type layoff.…Turn off the WALL Layer and the WINDOW Layer.…
And let's also turn off this 2D WALL Layer.…Now I'd like to build some windows here.…So, I will start by making REGIONS out of all these things.…And then I'll Subtract and make sure…
Author
Scott Onstott
Released
1/3/2019- Arranging elevations and sections around a plan
- Rotating objects in 3D
- Extruding walls, interior partitions, and headers
- Building slabs
- Modeling doors, windows, and stairs
- Sculpting terrain
- Creating a second floor
- Building roof surfaces
- Sculpting solids from regions and surfaces
- Modeling a tower
Skill Level Intermediate
Duration
Views
-
Introduction
-
What you should know1m 16s
-
1. Clean Up 2D Drawings
-
2. Model the Ground Floor
-
Navigate in 3D5m 55s
-
Rotate objects in 3D3m 40s
-
Extrude interior partitions2m 53s
-
Model curved headers3m 30s
-
Build the slab on grade4m 57s
-
3. Model Doors, Windows, and Stairs
-
Model doors with glazing7m 56s
-
Model a window5m 24s
-
Copy window groups2m 26s
-
Subobject manipulation5m 59s
-
Model stairs from plans5m 3s
-
Support the handrail6m 12s
-
-
4. Model Terrain Surfaces
-
Sculpt a sloping terrain4m 55s
-
5. Model the Second Floor
-
Extrude a walkway3m 33s
-
Create door headers1m 46s
-
6. Complete the Second Floor and Roof
-
Build interior partitions3m 47s
-
Cut window openings5m 20s
-
Create custom windows7m 35s
-
Build roof surfaces4m 41s
-
-
7. Model the Tower
-
Build the tower walls1m 37s
-
Build clerestory windows3m 46s
-
Model the tower walls4m 32s
-
Shell the tower2m 43s
-
-
Conclusion
-
Next steps43s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Build clerestory windows