From the course: AutoCAD: Developing A Prefab Unit
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding the ceiling - AutoCAD Tutorial
From the course: AutoCAD: Developing A Prefab Unit
Adding the ceiling
[Instructor] We're staying in the Developing The 3D Unit.dwg file. And as you can see, I'm in the southwest asymmetric with a Conceptional visual style which is highlighting our structural openings for our door and our window. Now you'll notice a polyline going around the outside edge of the walls there. That polyline is our Finished Ceiling Level polyline that we created earlier. What we want to do now is take that polyline to the inside edges of our external walls and then we want to extrude it as a solid upwards a little bit into the suspended ceiling to give it a 3D solid ceiling, rather than just a polyline that represents a ceiling. So what we're going to do now is we're going to go into the top-view on the ViewCube, like so. And what we'll also do is change our visual style back to 2D wireframe. Now you can't actually see the polyline that forms the Finished Ceiling Level. But you do want to make sure that you're on…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Converting polylines to regions to create wall objects5m 19s
-
(Locked)
Extruding the unit walls and partitions to the FCL4m 32s
-
(Locked)
Subtracting the structural openings2m 35s
-
(Locked)
Adding the ceiling4m 22s
-
(Locked)
Adding the floor5m 52s
-
(Locked)
Adding the door and window3m 42s
-
(Locked)
-
-
-
-
-