210 Output: Setting up a simple titleblock with PDF page setup and viewports

- [Instructor] We're going to take a look now at output … from AutoCAD in this particular tip and trick. … And you can see where in the model tab at the moment. … Here's our design with some dimensions, … it's a little metal plate with some holes in it. … And here's our title block over here … formed from three rectangular polylines. … Now what we're going to do … is basically make this design fit into this title block. … Now the title block itself is made up from three rectangles. … And what I'd want you to do first … is select these two rectangles here, like so. … And then explode them. … So we're going to go up to the modify panel here … and click on Explode like so, … So they then become individual line entities. … And then what we're going to do … is we're going to remove this one, … this one, … and this one, like so. … So I'll just delete those. … I'll explain why later. … Now, just before we go any further, … the drawing that we're using is available in the library. … You can see the name of it at the top of the screen. …