Learn about the additional properties found in the Plant 3D Properties dialog box.
- [Instructor] Typically, when you look at AutoCAD…properties, you see information such as color,…layer, line type, line width, et cetera.…Plant 3D has added additional information to the component,…so that we can view and modify directly inside…the properties dialog box.…Let's take a look at the additional properties…that have been added to our 3D components.…So let's start by coming down and opening…our drawing 01_06_Piping.…And I want you to notice something here,…just as a by-note, when you're working…with the Plant models, if you've been using xrefs,…you may see this message that pops up fairly frequently…while you're working here.…
You don't have to worry about this,…if it does pop up just close it down.…It doesn't affect anything you're working on,…it's just letting you know that at some point…this model was used in an xref.…So it's good practice when you're working in 3D,…come up here to this little tab that you see…on the top left hand corner of your view area,…and click on that, and make sure that you're working…
Author
Irene Radcliffe
Updated
11/12/2018Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome50s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
2019 release bug1m 20s
-
Renaming drawing files2m 42s
-
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Adding instrumentation3m 46s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Report Creator overview7m 45s
-
-
Conclusion
-
Next steps45s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Using the Plant 3D Properties dialog box